Journal publications

Journal publications

A63. M Prisbrey, F Guevara Vasquez, B Raeymaekers, 3D ultrasound directed self-assembly of high aspect ratio particles: on the relationship between the number of transducers and their spatial arrangement, Applied Physics Letters, accepted for publication (2020)

PDF DOI

A62. K Niendorf, B Raeymaekers, Additive manufacturing of polymer matrix composite materials with aligned or organized filler material: A review, submitted for publication, under review (2020)

PDF DOI

A61. Q Allen, B Raeymaekers, Surface texturing of prosthetic hip implant bearing surfaces: A review, Journal of Tribology T ASME, accepted for publication (2021)

PDF DOI

A60. Q Allen, B Raeymaekers, The effect of texture floor profile on the lubricant film thickness in a textured hard-on-soft bearing with relevance to prosthetic hip implants, Journal of Tribology T ASME, Vol. 143, 021801 (2021)

PDF DOI

A59. M Prisbrey, F Guevara Vasquez, B Raeymaekers, Arranging high aspect ratio particles in three-dimensional user-specified orientations with ultrasound directed self-assembly, Physical Review Applied, Vol. 14, 024026 (2020)

PDF DOI

A58. M Mroz, J Rosenberg, C Acevedo, JJ Kruzic, B Raeymaekers, SE Naleway, Ultrasound freeze-casting of a biomimetic layered microstructure in epoxy-ceramic composite materials to increase strength and hardness, Materialia, Vol. 12, 100754 (2020)

PDF DOI

A57. Q Allen, B Raeymaekers, Maximizing the lubricant film thickness between a rigid microtextured and a smooth deformable surface in relative motion, using a soft elasto-hydrodynamic lubrication model, Journal of Tribology T ASME, Vol. 142, 071802 (2020)

PDF DOI

A56. K Niendorf, B Raeymaekers, Quantifying macro- and microscale alignment of carbon microfibers in polymer-matrix composite materials fabricated using ultrasound directed self-assembly and 3D-printing, Composites Part A, Vol. 129, 105713 (2020)

PDF DOI

A55. P Wadsworth, I Nelson, DL Porter, B Raeymaekers, SE Naleway, Manufacturing bioinspired flexible materials using ultrasound directed self-assembly and 3D printing, Materials and Design, Vol. 185, 108243 (2020)

PDF DOI

A54. M Prisbrey, B Raeymaekers, Aligning high-aspect ratio particles in user-specified orientations with ultrasound directed self-assembly, Physical Review Applied, Vol. 12, 014014 (2019)

PDF DOI  

A53. BA Noble, B Raeymaekers, Polymer spreading on unidirectionally nanotextured substrates using molecular dynamics, Langmuir, Vol. 35, pp. 8784−8789 (2019)

PDF DOI Supplemental information

A52. DS Watring, KC Carter, D Crouse, B Raeymaekers, AD Spear, Mechanisms driving high-cycle fatigue life of as-built laser powder bed fusion Inconel 718, Material Science and Engineering A, Vol. 761, 137993 (2019)

PDF DOI  

A51. A Borjali, K Monson, B Raeymaekers, Predicting the polyethylene wear rate in pin-on-disc experiments in the context of prosthetic hip implants: a data-driven model based on experimental data and machine learning methods, Tribology International, Vol. 133, pp. 101-110 (2019)

PDF DOI Supplemental information

A50. TA Ogden, M Prisbrey, I Nelson, B Raeymaekers, SE Naleway, Ultrasound freeze casting: Fabricating bioinspired porous scaffolds through combining freeze casting and ultrasound directed self-assembly, Materials and Design, Vol. 164, 107561 (2019)

PDF DOI

A49. BA Noble, B Raeymaekers, Polymer spreading on substrates with nanoscale grooves using molecular dynamics, Nanotechnology, Vol. 30, 095701 (2019)

PDF DOI Supplemental information
A48. JJ Greenhall, L Homel, B Raeymaekers, Ultrasound directed self-assembly processing of nanocomposites with ultra-high carbon nanotube weight fraction, Journal of Composite Materials, Vol. 53(10), pp. 1329–1336 (2019)
PDF DOI
A47. M Prisbrey, B Raeymaekers, Ultrasound noncontact particle manipulation of 3D dynamic user-specified patterns of particles in air, Physical Review Applied, Vol. 10, 034066 (2018)
PDF DOI
A46. A Borjali, K Monson, B Raeymaekers, A patterned microtexture for patient-specific metal-on-polyethylene prosthetic implant bearings, Tribology International, Vol. 127, pp. 568-574 (2018)
PDF DOI
A45. J Langhorn, A Borjali, E Hippensteel, W Nelson, B Raeymaekers, Microtextured CoCrMo alloy for use in metal-on-polyethylene prosthetic joint bearings: multi-directional wear and corrosion measurements, Tribology International, Vol. 124, pp. 178-183 (2018)
PDF DOI
A44. A Borjali, J Langhorn, K Monson, B Raeymaekers, Using a patterned microtexture to reduce polyethylene wear in metal-on-polyethylene prosthetic bearing couples, Wear, Vol. 392–393, pp. 77–83 (2017)
PDF DOI
A43. MR Price, B Raeymaekers, Measuring adhesion of ultra-thin multi-layer DLC coatings to Ni and Si substrates using shear, tension, and nanoscratch molecular dynamics simulations, Acta Materialia, Vol. 141, pp. 317-326 (2017)
PDF DOI
A42. JJ Greenhall, B Raeymaekers, 3D printing macroscale engineered materials using ultrasound directed self-assembly and stereolithography, Advanced Materials Technologies, Vol. 2, 1700122 (2017)
PDF DOI Supplemental information
A41. BA Noble, CM Mate, B Raeymaekers, Spreading kinetics of ultra-thin liquid films using molecular dynamics, Langmuir, Vol. 33(14), pp. 3476-3483 (2017)
PDF DOI Supplemental information
A40. M Prisbrey, JJ Greenhall, F Guevara Vasquez, B Raeymaekers, Ultrasound directed self-assembly of three-dimensional user-specified patterns of particles in a fluid medium, Journal of Applied Physics, Vol. 121, 014302 (2017)
PDF DOI
A39. JJ Greenhall, F Guevara Vasquez, B Raeymaekers, Scalable ultrasound directed self-assembly of user-specified patterns of nanoparticles dispersed in a fluid medium, Applied Physics Letters, Vol. 108, 103103 (2016)
PDF DOI
A38. MR Price, A Ovcharenko, B Raeymaekers, Qualitative evaluation of ultra-thin multi-layer diamond-like carbon coatings using molecular dynamics nanoindentation simulations, Tribology Letters, Vol. 62(3) 10.1007/s11249-016-0655-1 (2016)
PDF DOI
A37. BA Noble, A Ovcharenko, B Raeymaekers, Terraced spreading of nanometer-thin lubricant using molecular dynamics, Polymer, Vol. 84, pp. 286-292 (2016)
PDF DOI
A36. CA Lockard, AP Sanders, B Raeymaekers, An experimental approach to determining fatigue crack size in polyethylene tibial inserts, Journal of the Mechanical Behavior of Biomedical Materials, Vol. 54, pp. 106-114 (2016)
PDF DOI
A35. M Kalin, A Pogacnik, I Etsion, B Raeymaekers, Comparing surface topography parameters of rough surfaces obtained with spectral moments and deterministic methods, Tribology International, Vol. 93, pp. 137-141 (2016)
PDF DOI
A34. M Qiu, B Raeymaekers, The load-carrying capacity of incompressible textured parallel slider bearings with surface roughness inside the texture features; Journal of Engineering Tribology, Vol. 229(4), pp. 547-556 (2015) (invited paper)
PDF DOI
A33. AP Sanders, CA Lockard, JN Weisenburger, H Haider, B Raeymaekers, Using a surrogate contact pair to evaluate polyethylene wear in prosthetic knee joints; Journal of Biomedical Materials Research Part B: Applied Biomaterials, DOI: 10.1002/jbm.b.33360 (2015)
PDF DOI
A32. SJ Corbitt, M Francoeur, B Raeymaekers, State-of-the-art fabrication of Mie resonance-based dielectric metamaterials operating at optical frequencies for use in engineering devices: A review; Journal of Quantitative Spectroscopy and Radiative Transfer, Vol. 229(4), pp. 547-556 (2015)
PDF DOI
A31. MR Price, A Ovcharenko, R Thangaraj, B Raeymaekers, Deformation of ultra-thin diamond-like carbon coatings under combined loading on a magnetic recording head; Tribology Letters, Vol. 57(2), pp. 1-9 (2015)
PDF DOI
A30. BA Noble, A Ovcharenko, B Raeymaekers, Quantifying lubricant droplet spreading on a flat substrate using molecular dynamics; Applied Physics Letters, Vol. 105, 151601 (2014)
PDF DOI
A29. JJ Greenhall, F Guevara Vasquez, B Raeymaekers, Dynamic behavior of microscale particles controlled by standing bulk acoustic waves; Applied Physics Letters, Vol. 105, 144105 (2014)
PDF DOI
A28. AP Sanders, B Raeymaekers, The effect of polyethylene creep on tibial insert locking screw loosening and back-out in prosthetic knee joints; Journal of the Mechanical Behavior of Biomedical Materials, Vol. 38, pp. 1-5 (2014)
PDF DOI
A27. M Qiu, A Chyr, AP Sanders, B Raeymaekers, Design of bio-inspired prosthetic knee joints; Tribology International, Vol. 77, pp. 106-110 (2014)
PDF DOI
A26. A Chyr, M Qiu, J Speltz, RL Jacobsen, AP Sanders, B Raeymaekers, A patterned microtexture to reduce friction and wear and increase longevity of prosthetic hip joints; Wear, Vol. 315, pp. 51-57 (2014)
PDF DOI
A25. MD Haslam, B Raeymaekers, Aligning carbon nanotubes using bulk acoustic waves to reinforce polymer composites; Composites Part B, Vol. 60, pp. 91-97 (2014)
PDF DOI
A24. M Qiu, B Bailey, R Stoll, B Raeymaekers, The accuracy of the compressible Reynolds equation for predicting the local pressure in gas-lubricated textured parallel slider bearings; Tribology International, Vol. 72, pp. 83–89 (2014)
PDF DOI
A23. A Chyr, AP Sanders, B Raeymaekers, A hybrid apparatus for friction and accelerated wear testing of total knee replacement bearing materials; Wear, Vol. 308, pp. 54-60 (2013)
PDF DOI
A22. M Qiu, B Minson, B Raeymaekers, The effect of texture shape on the friction coefficient and stiffness of gas lubricated parallel slider bearings; Tribology International, Vol. 67, pp. 278-288 (2013)
PDF DOI
A21. JJ Greenhall, F Guevara Vasquez, B Raeymaekers, Continuous and unconstrained manipulation of micro-particles using phase-control of bulk acoustic waves; Applied Physics Letters, Vol. 103, 074103 (2013)
PDF DOI
A20. SJ Petersen, S Basu, B Raeymaekers, M Francoeur, Tuning near-field thermal radiative properties by quantifying sensitivity of Mie resonance-based metamaterial design parameters; Journal of Quantitative Spectroscopy and Radiative Transfer, Vol. 129, pp. 277-286 (2013)
PDF DOI
A19. MD Haslam, B Raeymaekers, A new index to quantify dispersion of carbon nanotubes in polymer-based composites; Composites Part B, Vol. 55, pp. 16-21 (2013)
PDF DOI
A18. G Pawar, P Pawlus, I Etsion, B Raeymaekers, The effect of determining topography parameters on analyzing elastic contact between isotropic rough surfaces; Journal of Tribology T ASME, Vol. 135, 011401 (2013)
PDF DOI
A17. M Qiu, A Delic, B Raeymaekers, The effect of texture shape on the load carrying capacity of gas lubricated parallel slider bearings; Tribology Letters, Vol. 48(3), pp. 315-328 (2012)
PDF DOI
A16. B Raeymaekers, C Pantea, DN Sinha, Ultrasound imaging in highly attenuating drilling fluids, Ultrasonics, Vol. 52(4), pp. 564-570 (2012)
PDF DOI
A15. B Raeymaekers, C Pantea, DN Sinha, Manipulation of diamond nanoparticles using bulk acoustic waves, Journal of Applied Physics, Vol. 109, 014317 (2011)
PDF DOI
  A14. B Raeymaekers, FE Talke, The effect of laser polishing on fretting wear between a hemisphere and a flat plate; Wear, Vol. 268, pp. 416-423 (2010)
PDF DOI
  A13. B Raeymaekers, S Helm, R Brunner, E Fanslau, FE Talke, Reducing fretting wear between a hollow sphere and a flat plate; Wear, Vol. 268, pp. 1347-1353 (2010)
PDF DOI
  A12. U Boettcher, B Raeymaekers, RA de Callafon, FE Talke, Dynamic modeling and control of a piezo-electric dual-stage tape servo actuator; IEEE Transactions on Magnetics, Vol. 45(7), pp. 3017-3024 (2009)
PDF DOI
  A11. B Raeymaekers, MR Graham, RA de Callafon, FE Talke, Design of a dual stage actuator tape head with high bandwidth track-following capability; Microsystem Technologies, Vol. 15(10-11), pp. 1525-1529 (2009)
PDF DOI
  A10. B Raeymaekers, FE Talke, Attenuation of lateral tape motion due to frictional interaction with a cylindrical guide; Tribology International, Vol 42(5), pp. 609-614 (2009)
PDF DOI
  A9. B Raeymaekers, FE Talke, Sources and measurement of lateral tape motion: a review; Journal of Tribology T ASME , Vol. 131(1), 011903 (2009)
PDF DOI
  A8. DE Lee, B Raeymaekers, FE Talke, In-situ monitoring of the brush/rotor interface of a homopolar motor with acoustic emission; Australian Journal of Mechanical Engineering , Vol. 6(1), pp. 53-60 (2008) (paper selected for publication from Austrib06 conference) 
PDF DOI
  A7. B Raeymaekers, DE Lee, FE Talke, Characterization of the brush/rotor Interface of a homopolar motor with acoustic emission; Tribology International , Vol. 41, pp. 443-448 (2008)
PDF DOI
  A6. B Raeymaekers, FE Talke, Lateral motion of an axially moving tape on a cylindrical guide surface; Journal of Applied Mechanics T ASME, Vol. 74(6), pp. 1053-1056 (2007)
PDF DOI
  A5. B Raeymaekers, I Etsion, FE Talke, A model for magnetic tape/guide friction reduction by laser surface texturing; Tribology Letters, Vol. 28(1), pp. 9-17 (2007)
PDF DOI
  A4. B Raeymaekers, FE Talke, Characterization of tape edge contact with acoustic emission; Journal of Vibration and Acoustics T ASME, Vol. 129(4), pp. 525-529 (2007)
PDF DOI
  A3. B Raeymaekers, I Etsion, FE Talke, Enhancing tribological performance of the magnetic tape/guide interface by laser surface texturing; Tribology Letters, Vol. 27(1), pp. 89-95 (2007)
PDF DOI
  A2. B Raeymaekers, I Etsion, FE Talke, The influence of operating and design parameters on the magnetic tape/guide friction coefficient; Tribology Letters, Vol. 25(2), pp. 161-171 (2007)
PDF DOI
  A1. B Raeymaekers, RJ Taylor, FE Talke, Non-contact tape tension measurement and correlation of lateral tape motion and tape tension transients; Microsystem Technologies, Vol. 12(4), pp. 814-821 (2006)
PDF DOI